1 |
Model |
XC6000 |
2 |
Truck Dimensions |
Overall Length |
9,460mm |
|
|
Overall Width |
2,500mm |
|
|
Overall Height |
3,800mm |
3 |
Truck Cab & Chassis |
Brand |
ISUZU |
|
|
Model |
QL1180XQFRY |
|
|
Drive Type |
4X2 |
|
|
Chassis Curb Weight |
7,300kg |
|
|
Max. GVW |
18,000kg |
|
|
Wheel Base |
5,550mm |
|
|
Max. Speed |
90km/h |
|
|
Driver Cabin Capacity |
1 driver + 2 passengers |
|
|
Engine |
- Model: ISUZU 6HK1-TCL
- Type: 6-cyilinder, water cooling, turbo charged and intercooled
- Displacement: 7790ml
- Rated Power and rotate speed: 177kw/2400rpm
- Maximum torque speed: 706NM/1450rpm
- Emission standard: Chinese V
|
|
|
Transmission |
- Model: ISUZU MLD-6Q
- Type: manual transmission with 6 forward and 1 reverse gears
|
|
|
Air Conditioning
(driver cabin)
|
Cooling capacity 5.7kw |
|
|
Steering |
Hydraulic power steering |
|
|
Tire |
- Type: 295/80R22.5 16PR, 11.00R20 16PR
- Number: 6
|
|
|
Fuel Tank |
150L |
4 |
Vanbody |
Kitchen Dock Height |
1450±50mm onwards |
|
|
Payload |
4,000kg |
|
|
Vanbody Dimensions |
- Overall external Length: 7,500mm
- Overall external Width: 2,500mm
- Overall external Height: 2,400mm
|
|
|
Doors |
- Type: Front and rear Insulated sliding Doors
- Dimensions: length 1,900mm, width 1,100mm
|
|
|
Walls & Roof |
- Rigid press injected CFC polyurethane foam sandwich panels (80 -100 mm). One piece panels are full-width/full-height & full- length panels manufactured under high pressure in a special autoclave with metal plates inserted in between
- Internal and external faces are covered with white smooth board
|
|
|
Floor |
- The floor thickness is approx. 108mm
- Has an impact resistance of up to 7kg/cm2
- The floor material isnon slip aluminum plate, machine welded to enhance consistency and reliability.
|
5 |
Platform |
Type |
Working platform and 4-way operation platform |
|
|
Dimensions |
- Working platform (L×W): 1,400mm×2,380mm
- 4-way operation platform (L×W): 1,100mm×1,100mm
|
|
|
Payload |
- Working platform: 1,000kg
- 4-way operation platform: 400kg
|
|
|
4-way side shift |
800mm |
|
|
4-way max. extension |
600mm |
|
|
Min. Servicing Height |
2,800±50mm |
|
|
Max. Servicing Height |
6,100±50mm |
|
|
Safety Handrails |
900mm high extendable tubular steel protective handrails mounted at platform sides, handrails extend to leading edge of platform |
|
|
Others |
- Platform operation is powered by advance systems allowing piston, auxiliary & hand pump to drive the platform
- 25mm Non-slip aluminum alloy profiles floor surface
- Non-marking rubber bumper mounted at leading edge of platform
- Control panel for vanbody and platform is fitted into the internal of vanbody and waterproof
- Fixed canopy
|
6 |
Refrigeration System (vanbody) |
|
- Model: CARRIER 850U
- System is equipped with cable and socket to connect the external electric supply
|
7 |
Hydraulic System |
Max. Work Pressure |
14Mpa |
|
|
Hydraulic Oil Tank |
125L |
|
|
Gear Pump |
- Rated power: 23Mpa
- Displacement: 45ml/r
- Brand: CASAPPA
|
|
|
Manual Emergency Pump |
- Rated power: 22Mpa
- Displacement: 45ml per time
- Brand: Hipo
|
|
|
Electric Emergency Pump |
- Rated power: 13Mpa
- Displacement: 4.3L/min
- Max. Duration: 2min
|
|
|
Cylinder |
Twin telescopic chrome plated lift cylinders. |
|
|
Functions |
- All hydraulic operations are easy accessible at ground level including vanbody up/down, stabilizers up/down, platform left/right, platform in/out, etc.
- Internal emergency power allows retraction of all hydraulic cylinders without acceleration of the truck engine.
- In the event of failure of the hydraulic systems, all functions can be controlled via the manual emergency pump.
- Velocity fuses mounted at each cylinder to halt rapid descent of hoist in the event of a sudden system pressure loss. Pilot operated check valves have to be mounted onto the cylinder.
|
8 |
Electric System |
Voltage |
24V |
|
|
Battery |
2 units, 12V/115Ah |
|
|
Light System |
- Four flash LED lights to be fixed at the 4 bottom corners of the van body
- Amber flashing warning light mounted at center of van body roof.
- Back-up spotlight mounted at rear of chasiss.
- headlights and clearance lights
- Eight (8) LED lights for van body interior are mounted flush to the van body ceiling to avoid damages during loading & unloading.
|
|
|
Safety Features |
- Interlock to prevent raising the van body or extending the stabilizers unless transmission is in neutral and parking brake
- Van body cannot be raised above platform height from driver control panel
- Van body cannot be raised above the (1700mm) unless the stabilizers are fully extended.
- Stabilizers cannot be retracted unless van body is fully lowered.
- Left Front stabilizer (nearest driver cabin) is the last to fully retract, providing the operator with a visual indication that all stabilizers are fully retracted.
- Warning light on dash to indicate van body is raised.
- Warning light on dash to indicated stabilizers are extended
- Engine starter protection to prevent the starter from being engaged while the engine is running
- The truck is equipped with an automatic sound alarm (buzzer) activatedduring each of the following operation with different tone: Reversing of the truck; Raising and lowering of the van body; Extend and retract of stabilizers.
- When engine stop function is activated, non-essential electrical devices is disconnected form their power source to conserve battery power.
- Engine stops if transmission is being engaged while stabilizers are not fully retracted.
- Retraction of stabilizers is only possible if the van body is fully down.
- The vehicle cannot move when the PTO is engaged.
- Warning flash light to be fixed to the nearest point of each Stabilizer and should flash whenever stabilizer are extended or retracted.
|
9 |
Painting |
Chassis cab, platform and van body |
White RAL 9003 |
|
|
Chassis frame and mounted equipment |
Black |
|
|
Stabilizers |
Red |
|
|
Main cylinders |
Black |
|
|
Platform cylinders |
White |
|
|
Customized paiting & logo decoration |
Included |